DOVPO Topside 90W Squonk mod
The Dovpo x TVC Topside 90W Squonk Box Mod is an excellent device featuring a solid zinc alloy, aluminum alloy, and stainless steel construction with a revolutionary squonking method that is sure to set the trend for manufacturers to come.
DOVPO x TVC Topside 90W Single Squonk Mod Review
From Great Power Comes Great SimplicityBrian The Vapor Chronicles
From Great Power Comes Great SimplicityBrian The Vapor Chronicles
DOVPO Topside 90W Squonk Mod is the successor of the DOVPO X vaping Biker BASIUM 180W, Brian from the vapor chronicles and Dovpo collaborated in designing the Topside.
Dovpo was the worlds first brand to introduce the top-refilling squonking device; this enables the user to refill e-liquid from the top of the mod without removing the squeeze bottle.
Design & Diversity
The device has excellent form factor and contours around the battery and bottle compartments giving you beautifully curved edges that are a pleasure to hold. The original double-barrel design inspired Dovpo TVC Box Mod.
Starting from the top, we can see the 510 spring-loaded, leak resistance 510 connectors, with the base containing Delrin insulator that can easily fit in a 25 mm Atty with ease. Surely 30 mm Atty will show a slight overhang.
Right next to the 510 you will see slightly raise top cap which is the most intriguing part of the mod. You might wonder how the top fill mechanism works.
Note: Because the tube works on the suction mechanism you must not fill e-juice right to the top of the bottle. You should only fill e-liquid up to the bottle stainless steel trim.
Look at the picture above you will see a little tiny hole that is the tube that goes inside the bottle and connects the e-liquid to the RDA. The tube acts like a pipeline that connects the e-liquid inside the bottle with the RDA. Aka The Bridge Connect squonking system. Another cool feature is they magnetize the top cap so after you remove it you can stick it to the bottom of the mod.
How to remove the Topside 90W Squonk bottle.
One of the critical points Brian was stressing about was to avoid any leakage into the battery compartment and interface, place the mod vertical at 90 angles when removing the squonk bottle.
The Squonk bottle on the x TVC Topside 90W mod offers a sizeable 10ml capacity squeeze bottle that is reverse compatible with the dual battery 200W Topside bottle and sled. Additionally, you will receive 2x 10ml squonk bottles inside the box.
0.96 inch (2.44 cm) OLED Screen was not that great in outdoor use, but the black and white color scheme does excellent indoors.
The Menu system is standard and reminded me of the Geekvape Agis Legend menu system.
Here is a complete walkthrough how to use the Menu system on DOVPO Topside 90W
Hold Fire Button and “-” Button to enter Menu. ￼
POWER: Or Wattage Mode.
- Press “+” or “-” to adjust wattage in 0.5W increment when it’s under 100W or in 1W when it’s over 100W.
- Hold “+” or “-” to cause the wattage to scroll more quickly.
- When the device is standing by, all values displayed on the screen are calculated values.
- When firing the device, the values will be real-time values.
- Note: Resistance will always be the real-time value.
- Press “+” or “-” to adjust the voltage in 0.1v increment from 1.0v to 12.0v. Hold “+” or “-” button to cause the voltage to scroll more quickly.
Temperature Control Mode
- (Ni, Ti, Ss316) When in Temperature Control Mode
- press or hold “+” or “-” button to adjust the temperature. When temperature value reaches the highest/lowest point in Celsius or Fahrenheit, press “+” or “-” again to switch from °F to °C or °C to °F.
- To adjust pre-heat power in Temperature Control Mode, hold both Fire Button and “+” button for 1 second, wattage value will flash, you can adjust the wattage by pressing/holding “+” or “-” switch.
- You can adjust TCR value from 0.00010
- (010 on display)to 0.00999 ( 999 on-screen) for a more accurate temperature control vaping experience.
- Enter the “STATS” menu; it shows you how many puffs and how much time you vaped the device since the last reset.
- There are two options in the submenu, to reset or exit to the previous menu.
- The screen will go dim after 15 seconds of inactivity.
- The device will enter Sleep Mode after 180 seconds of inactivity. Press any button to wake up the device.
Plug Micro USB cable to charge the device, batteries icons will show they are getting filled up.
Color Schemes Dovpo Topside 90W Squonk Mod
Dovpo really out did the completion offering 8 different colour schemes ranging from black to camouflage.
- Gun Metal
Specification Dovpo X Topside 90W Squonk Mod
- Material: Zinc Alloy
- Size: 92.0 × 54.0 × 27 mm
- Power Range: 5.0W-90.0W
- Temperature Range: 100-315℃/ 200-600℉
- Display: 0.96″
- OLED Input Voltage: 6.4V – 8.4V
- Output Voltage: 1.0v – 8.5v
- Resistance: 0.08ohm- 3.50ohm
- Battery: 18650, 21700, 20700 High-drain Battery
- Silicone bottles with a capacity of 10ml
- Charging: Micro USB 5V/2A
- Gold-plated spring-loaded 510 pin
Let’s now look at the safety Features for Topside X dual 90w Squonk Mod.
- Battery Reversal Protection
- Short-circuit Protection
- If there is a short circuit, when you press the Fire Button, the screen will display “SHORTED.”
- If the resistance of the atomizer is lower than 0.08 Ω, when you press the Fire Button, the screen will display “LOW Ω.”
- Open-circuit Warning:
- when you press the Fire Button, the screen will display “CHECK ATOMIZER.”
- Overtime Protection
- The device will cut power after 10 seconds of continuous firing; the screen will display “OVER 10S.”
- Over-temperature Protection
- If the board temperature goes over 75℃/167℉, the device will cut power; when you press Fire Button, the screen will display “TOO HOT.”
- Low-voltage Protection
- If the battery level is lower than 6.4v or either one battery has a lower than 2.9v voltage, when you press the Fire Button, the screen will display “LOW BATTERY.”
Quality and Performance of Dovpo Topside 90W Squonk Mod
Bottom Line Questions? Q & A
Can you vape while squonking?
Yes. We tested squonking while vaping, and it was great. Dovpo says you can even vape while charging, but we don’t recommend you vape while charging any vape device.
Does it really Squonk? How is the squonking feature?
How long does the battery last on the topside dual?
What are the cons of the Mod?
- One Of the Main cons about the DOVPO Topside 90W mod is the TC Mode. It doesn’t perform well. When we tested it at 450 F, the mod gives out a warm vape at first, but the 2nd and 3rd attempt were a total failure. We couldn’t get a palatable vapor and flavor production using TCR modes.
- Battery door needs redesigning. The battery door lock is so hard and doesn’t work correctly.
- Squonking pressure at 5ml (half level) Squonking pressure is low.
What is inside the Box of DOVPO Topside 90W Squonk Mod
- 1 x Topside Dual Box Mod
- 2 x 10ml Squonk Bottle Kit
- 1 x Accessories Bag
- 1 x Micro USB Cable
- User Manual
- Battery Usage Warning
Is it Worth the Price Tag?
10ml Squonking capacity,90W power, Top Fill system, 8 step security features, Zinc Alloy and Stainless steel materials used to make this device, its well worth the price tag.
Dovpo Topside 90W squonking Mod has outperformed the competition with its new Top filling system. Dual batteries, OLED B/W system and its all-new chipset give you good battery life and fantastic squonking vape experience.
We ranked it number #4 The Best Regulated Suqonking Device for 2019
Dovpo Topside Squonker Box Mod 90W Price and Deals
The Below list contains best prices for the Topside Dual 90W
- Top Fill Method
- Color options were Great
- 8 Different Security Settings
- Great Build Quality and Paint
- Dual Suqonker
- 200W Power Mod
- Great LED B/W Screen
- Can handle 28 mm Attays
- Great Menu System
- Beautiful Design
- Vape While Charging
- TCR mod Needs Improvements
- TC Mod is not accurate
- Battery Door needs improvement
- Sqounking pressure reduces after 5ml e juice
- No PRE heat Options
- battery Lock is very hard
Specification: DOVPO Topside 90W Squonk mod
88.5 mm x 54 mm x 42 mm
Micro USB Port – 5V/2A
|Juice Bottle Capacity|
10ml Silicone Bottle